Mortars, screeds, adhesives

The accredited laboratories of the Technical and Test Institute for Construction Prague (TZÚS Praha, s.p.) offer testing in the field of mortars, screeds, adhesives; the list of accredited test procedures can be found in the table below. The Technical and Test Institute for Construction Prague also offers non-accredited test procedures in this field. If you are interested in services in this area, please contact the branch in your selected region or use the inquiry form at the bottom of the page. Laboratory services are complemented with the services provided by the certification body for products.

Regional branches operating in the field:
(click to contact your regional branch or use the contact form at the bottom of the page)

The Prague Branch
The České Budějovice Branch
The Předměřice nad Labem Branch
The Brno Branch
The Ostrava Branch
 

ČSN 72 2452  Testing of frost resistance of mortar
ČSN 72 7030  Determination of water vapour coefficient diffusion of building material. General part
ČSN 73 2577  Test for surface finish adhesion of building structures to the base
ČSN 73 2578  Test for water-tightness of surface finish of building structures
ČSN 73 2579  Test for frost resistance of surface finish of building structures
ČSN 73 2580  Testing of water vapour permeability through surface finish of building structures
ČSN 73 2582  Test for abrasive resistance of surface finish of building structures
ČSN 73 6175 Measurement and evaluation of pavement surface roughness
ČSN 73 6242 Design and construction of pavements on road bridges
ČSN EN 1015-1  Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
ČSN EN 1015-10  Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
ČSN EN 1015-11  Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strentgth of hardened mortar
ČSN EN 1015-12  Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates
ČSN EN 1015-17  Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
ČSN EN 1015-18  Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillarity action of hardened mortar
ČSN EN 1015-19  Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars
ČSN EN 1015-21  Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates
ČSN EN 1015-3  Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
ČSN EN 1015-4  Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)
ČSN EN 1015-6  Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
ČSN EN 1015-7  Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar
ČSN EN 1015-9  Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
ČSN EN 1052-3  Methods of test for masonry - Part 3: Determination of initial shear strength
ČSN EN 12002  Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts
ČSN EN 12003  Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
ČSN EN 12190  Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
ČSN EN 12617-1  Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
ČSN EN 12617-4  Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion
ČSN EN 12808-1  Adhesives and grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars
ČSN EN 12808-2  Grouts for tiles - Part 2: Determination of resistance to abrasion
ČSN EN 12808-3  Grouts for tiles - Part 3: Determination of flexural and compressive strength
ČSN EN 12808-4  Grouts for tiles - Part 4: Determination of shrinkage
ČSN EN 12808-5  Grouts for tiles - Part 5: Determination of water absorption
ČSN EN 13036-1  Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
ČSN EN 13036-4  Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
ČSN EN 13057  Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption
ČSN EN 1308  Adhesives for tiles - Determination of slip
ČSN EN 1324  Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
ČSN EN 13279-2  Gypsum binders and gypsum plasters - Part 2: Test methods
ČSN EN 13294  Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time
ČSN EN 13295  Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation
ČSN EN 13412  Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
ČSN EN 13454-2  Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods
ČSN EN 1346  Adhesives for tiles - Determination of open time
ČSN EN 1347  Adhesives for tiles - Determination of wetting capability
ČSN EN 1348  Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
ČSN EN 13687-1  Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
ČSN EN 13687-3  Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact
ČSN EN 1372  Adhesives - Test method for adhesives for floor and wall coverings - Peel test
ČSN EN 1373  Adhesives - Test method for adhesives for floor and wall coverings - Shear test
ČSN EN 13872  Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
ČSN EN 13892-2  Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
ČSN EN 13892-3  Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme
ČSN EN 13892-4  Methods of test for screed materials - Part 4: Determination of wear resistance - BCA
ČSN EN 13892-6  Methods of test for screed materials - Part 6: Determination of surface hardness
ČSN EN 13892-8  Methods of test for screed materials - Part 8: Determination of bond strength
ČSN EN 13963  ČSN EN 13963 
ČSN EN 14630  Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method
ČSN EN 1465  Adhesives - Determination of tensile lap-shear strength of bonded assemblies
ČSN EN 14891 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
ČSN EN 1542  Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
ČSN EN 1770 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion
ČSN EN 1841  Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive
ČSN EN 1881  Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method
ČSN EN 1903  Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
ČSN EN 445  Grout for prestressing tendons - Test methods
ČSN EN ISO 15148  Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion
ČSN EN ISO 5470-1  Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
DIN 52615  Testing of thermal insulating materials; determination of water vapour (moisture) permeability of construction and insulating materials
DIN-V 18550  Plastering/rendering and plastering/rendering systems - Execution
IP 0600T008 (ČSN 72 2453)  Testing of volume stability of mortar
IP 0600T009 (ČSN 72 2454)  Testing of permeability for water vapours of mortar
WTA 2-9-04/D  Renovation mortar systems WTA
Name *:
E-mail *:
Phone:
Question *: