Metal parts, metal structures, anchors, fasteners

The accredited laboratories of the Technical and Test Institute for Construction Prague (TZÚS Praha, s.p.) offer testing in the field of metal parts, metal structures, anchors, fasteners; the list of accredited test procedures can be found in the table below. The Technical and Test Institute for Construction Prague also offers non-accredited test procedures in this field. If you are interested in services in this area, please contact the branch in your selected region or use the inquiry form at the bottom of the page. Laboratory services are complemented with the services provided by the certification body for products.

Regional branches operating in the field:
(click to contact your regional branch or use the contact form at the bottom of the page)

The Prague Branch
The České Budějovice Branch
The Brno Branch
The Ostrava Branch
 

TR 026, final draft 12.12.2006  Tests of plastic anchors and dowels
TR 025, final draft 6.12.2006  Tests of plastic anchors and dowels
ETAG 029, čl. 2.4  Tests of metallic anchors
ETAG 020, annex A  Tests of plastic anchors and dowels
ETAG 014, tab. 5.1  Tests of plastic anchors and dowels
ETAG 006, chapter 5.3.4.1, 5.3.4.3, 5.3.7.1, 5.3.7.2  Tests of plastic anchors and dowels
ETAG 001, annex A  Tests of metallic anchors
ČSN ISO 7801  Metallic materials. Wire. Reverse bend test
ČSN ISO 2178  Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
ČSN EN ISO 9015-1  Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ČSN EN ISO 7438  Metallic materials - Bend test
ČSN EN ISO 6892-1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ČSN EN ISO 6507-1  Metallic materials - Vickers hardness test - Part 1: Test method
ČSN EN ISO 5173  Destructive tests on welds in metallic materials - Bend tests
ČSN EN ISO 2808  Paints and varnishes - Determination of film thickness
ČSN EN ISO 2360  Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
ČSN EN ISO 17660-2 Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints
ČSN EN ISO 17660-1 Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints
ČSN EN ISO 15630-3 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
ČSN EN ISO 15630-2 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric
ČSN EN ISO 15630-1 Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire
ČSN EN ISO 1463  Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ČSN EN 846-9 Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
ČSN EN 845-3+A1  Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
ČSN EN 845-2, chapter 5.4  Specification for ancillary components for masonry - Part 2: Lintels
ČSN EN 845-1+A1, chapter 5.3  Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
ČSN EN 508-3, annex B  Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
ČSN EN 508-2, annex A  Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
ČSN EN 508-1, annex D  Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
ČSN EN 506, annex A  Roofing products from metal sheet - Specification for self-supporting products of copper or zinc sheet
ČSN EN 40-3-2, chapter 7  Lighting columns - Part 3-2: Design and verification - Verification by testing
ČSN EN 1993-1-3, annex A  Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
ČSN EN 1917  Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
ČSN EN 14782 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
ČSN EN 13964 Suspended ceilings - Requirements and test methods
ČSN EN 1337-5 Structural bearings - Part 5: Pot bearings
ČSN EN 1337-3  Structural bearings - Part 3: Elastomeric bearings
ČSN EN 12797  Brazing - Destructive tests of brazed joints
ČSN EN 12767 Passive safety of support structures for road equipment - Requirements and test methods
ČSN EN 1253-2  Gullies for buildings - Part 2: Test methods
ČSN EN 124  Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type, testing, marking, qality control
ČSN EN 10080 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
ČSN EN 10002-1  Metallic materials. Tensile testing. Part 1: Method of test (at ambient temperature)
ČSN 74 6930 Steel floor grids. Common regulations
ČSN 42 0363  Fatigue test 
ČSN 42 0355  Relaxation test of prestressing steels at normal temperatures
ČSN 42 0008  Form and position deviations of metallurgic products
Name *:
E-mail *:
Phone:
Question *: